paper machinery

Detailed Product Description

1.General Introduction 
paper making  machinery(screw press) is the key equipment in the APMP process, mainly used for pulp thickening and dewatering. You can get high consistency pulp from it.
2.Structure Features
Screw press consists of cylinder filtering drum and diameter change screw (The inner diameter increases gradually, the outer diameter is invariant) that form a close compress room. At the end of the screw, pneumatic backpressure disc is added for shaft dewatering and automatic control.
3.Working Principal
After entering the screw press, as the screw shaft turning, the pulp is pushed forward. Because the close room becomes smaller and smaller, and the pulp is pushed by the backpressure disc, filtrate is squeezed out. Pulp is discharged between the end of the screw and the pneumatic backpressure disc. Filtrate going through the screen flows into the collecting box from the bottom of the envelope. Shaft dewatering can make dewatering effect consistent inside and outside of the compressed pulp layer. Big compression ratio screw shaft and pneumatic backpressure disc make the pulp be highly thickened to meet the required consistency for the following stage. The pneumatic backpressure disc can automatically control the discharging pressure, making the dryness of the discharged pulp uniform and steady.main parameter(1): 

Types project	SP450	SP600	SP750	SP750LM	SP1000	SP1000LM
Screw diametermm	Φ450	Φ600	Φ750	Φ750	Φ1000	Φ1000
Screw rotate speedr/min	10-33	10-33	10-33	20-50	10-30	20-50
Capacityt/d	-50	50-100	100-200	150-250	200-350	300-400
Motor powerkW	55	90	160	250	315	355
Feed dryness%	4-8	4-8	4-8	4-8	4-8	4-8
Discharge dryness%	30-40	30-40	30-40	30-40	30-40	30-40
External dimensiomm	6200×1600×1435	6940×1820×1605	7240×1940×1865	9600×2673×2009	10850×2673×2009	12850×2673×2009
Gross weight of the equipmentkg	4800	6800	9000	14000	18000	24000

 main parameter(2):

Parameter                   types	ZLY900	ZLY1000	ZLY1100	ZLY1200	ZLY1500
Screw diametermm	Φ900	Φ1000	Φ1100	Φ1200	Φ1500
Capacityt/d	40	50	70	100	150
Mating motor powerkW	22	30	37	55	75
Net weightt	14	19	24	27	32